AXEON Solo I All-In-One 4-Stage 50 GPD RO System

  • $295.00
  • Save $159


  Most Items Ship Same Day   (Warranty, Return and Refunds)

The AXEON® Solo I 50 GPD Reverse Osmosis System contains highly advanced membrane technology. To ensure water is safe, clean, and crisp, this system features four stages of filtration. It is fully integrated with a sediment filter, sintered carbon block, RO membrane, and an inline post carbon. The design allows for fast and easy service. Three of the four cartridges are within a single housing. The fourth stage can either consist of an inline post carbon for improved tasting water or an optional remineralization cartridge which will balance the water's pH level.

Features:

  • AXEON High Flow 50 gpd Solo RO Membrane
  • AXEON 2-in-1 Sintered Carbon Block with 5 Micron
  • AXEON Inline Post Carbon
  • 3.2 Gallon Pressurized White Metal Storage Tank
  • Designer Long Reach Air-Gap Faucet
  • Moisture Sensor
  • All Necessary Tubing, Hardware, and Fittings For Installation 
  • 1-Year Manufacturer's Warranty

 Benefits:

  • 30% Higher Flow to the Faucet
  • 50% Less Water to the Drain
  • 50% Smaller Footprint Than Traditional Systems
  • High Flow RO Membrane Fills the Tank Faster
  • High-Quality Integrated Sediment/ Carbon Filter
  • Bottle Quality Water from the Faucet
  • Quick and Easy Installation and Service 
Stage Description Replacement Interval
1 & 2

2 Stage Filter Polypropylene Pre-Filter / Sintered Carbon 

6 - 12 Months
3

50 GPD Reverse Osmosis Membrane

12 Months
4

Inline Post Carbon (Prior to Faucet)

6 - 12 Months
5

Optional: Inline Remineralization Cartridge

6 - 12 Months

 

Specifications:

  • Model: Solo I
  • AXEON Part Number: 211470
  • Capacity (gpd): 50

Design:

  • Configuration: Single Pass
  • Feedwater Source: <1,000 ppm of TDS
  • Standard Recovery Rate %: 33

Rejection and Flow Rates:

  • Nominal Salt Rejection %: 96
  • Permeate Flow (gpd): 50 

Connections:

  • Feed (in): 3/8" QC
  • Permeate (in): 3/8" QC
  • Concentrate (in): 3/8" QC 

Membranes:

  • Membrane Quantity: 1
  • Membrane Size: Solo 50 GPD 

Pumps:

  • Pump Type: N/A 

System Electrical:

  • Standard Voltage + Amp Draw: N/A 

Operating Limits:

  • Maximum Feed Temperature (°F / °C): 100 / 38
  • Minimum Feed Temperature (°F / °C): 40 / 4
  • Maximum Feed Pressure (psi / bar): 40 / 2.76
  • Minimum Feed Pressure (psi / bar): 80 / 5.52
  • Maximum Feed Silt Density Index (SDI): < 5
  • Maximum Turbidity (NTU): < 1
  • Maximum Free Chlorine (ppm): < 1
  • Maximum TDS (ppm): < 1,000

Warranty:

  • 1-Year Warranty

 

Read more...
shop pay installments buy now pay later
(Open hours: 9:00 AM - 5:00 PM)

Disclaimer: Must be installed by a licensed contractor or warranty is void.

Questions?


Speak with an expert
1-888-615-0755



We Also Recommend