Arctic Titanium Heat Pump for Swimming Pools and Spas - 080ZA/B-R32

While hot tub users most often reference the heating requirements, the Arctic Heat Pump is also a chiller if needed. That’s right...It can heat and cool based on a simple controller selection. Ideal for hot climates that need a retreat from the hot summer heat! A cold water plunge is a must for Sauna owners. Now you can quickly change your hot tub to a cold plunge tub! Cold water therapy has many health benefits and is growing in popularity in North America as we discover what the Nordic Culture has practiced for centuries.

The Arctic 080ZA/B-R32 Heat Pumps works down to -4°F (-20°C). This air to water heat source is the most efficient cold weather heat pump on the market. Heats and cools with over 80% savings of traditional heating equipment. This unit is cable of producing up to 35.3 Kw or 120,500 BTU of heat energy. No other pool or spa heat pump on the market will outperform the Arctic 080ZA/B-R32 in colder weather. This allows you to open your pool earlier and close it later. It is also ideal for energy savings for spas and hot tubs. Working up to 104 F even in 20 F conditions! The Arctic 080ZA/B-R32 is great heat pump for most pools.

• Heat Pump for hot tubs, spas and smaller pools or swim spas
• Easy to install with no refrigeration mechanic needed
• Vibration pads included
• Drain pan and compressor low temp protection
• Hot gas defrost
• Drain Pan Freeze Protection for cold weather
• TUV Rheinland certified for installation in North America
• Three modes (heating, cooling, auto)
• Includes Heat Pump Digital Controller
• WiFi Remote Control Option
• Double Rotor DC inverter Compressor
• Operating Temperature Range -4°F (-20°C) to 113°F (45°C)
• Spiral Titanium Heat Exchanger
• Ultra Quite DC Brushless Fan Motor
• Sound Insulation
• High Efficiency Fin Heat Exchanger

How it works

The unit consumes electricity at a rate of only 1/3 to 1/5 of the heating capacity that it produces. The result is energy savings as high as 80% compared to traditional electric or gas pool or spa heaters. Built in hot gas defrost and drain pan/compressor freeze protection for cold weather performance.

• 1.5" water connections
• Max Amps 50
• 220-240/1/60 VAC
• Output 25.8 Kw (88,000 BTU)
• Weight 253 LBS (115 Kg)
• Flow rate 53.55 GPM (pool pump sold separately)
• 30.7" high x 34.6" wide x 45.7" tall
• 1 year parts warranty - 2 year compressor warranty (Extended Warranty Available)

Model		MALCRW	015ZA/(B)-R32	025ZA/(B)-R32	040ZA/(B)-R32	060ZA/(B)-R32	080ZB/(B)-R32
Power Supply		V/P/Hz	220-240/1/60	220-240/1/60	220-240/1/60	220-240/1/60	220-240/1/60
Rated Heating Capacity	Ambient Temp 27℃ Water Outlet 26.67℃	kW	7.5	12.5	18.0	28.0	35.3
Heating Power Input		kW	1.2	1.80	3.00	4.40	6.50
Heating Current Input		A	5.2	7.8	13.0	19.1	27.4
Co-Efficiency of Performance		COP	6.3	6.9	6.0	6.4	5.4
Rated Heating Capacity	Ambient Temp 15℃ Water Outlet 28℃	kW	6.5	10.6	13.8	23.7	26.7
Heating Power Input		kW	1.53	2.39	3.40	6.06	7.27
Heating Current Input		A	6.4	9.9	14.2	27.1	31.8
Co-Efficiency of Performance		COP	4.2	4.4	4.1	3.9	3.7
Rated Heating Capacity	Ambient Temp 0℃ Water Outlet 28℃	kW	4.3	7.6	11.3	17.9	19.4
Heating Power Input		kW	1.37	2.48	3.50	6.11	7.19
Heating Current Input		A	5.8	10.4	14.6	27.4	32.0
Co-Efficiency of Performance		COP	3.1	3.1	3.2	2.9	2.7
Total Load		A	9.20	16.90	21.70	31.90	38.60
Breaker Sizing		A	15.0	25.0	30.0	40.0	50.0
Nominal Water Flow Volume		GMP/m3/h	11.7/2.7	19.35/4.4	27.45/6.2	43.2/9.8	53.55/12.2
Ht Xchgr Water AP @ Nom Flow		kPa	1	3	7	20	25
Water Inlet/Outlet SizeThreaded		inch	1-1/2"	1-1/2"	1-1/2"	1-1/2"	1-1/2"
Refrigerant			R32	R32	R32	R32	R32
R32 Refrigerant Amount		oz/kg	28.22/0.8	35.27/1.0	45.86/1.3	67.02/1.9	95.24/2.7
Sound Level		dB(A)	48	52	54	54	58
IP Rating			IPX4	IPX4	IPX4	IPX4	IPX4
Net Weight		kg/LBS	49/108	61/134.5	73/161	105/231.5	115/253.5
Unit Dimensions(L/W/H)		mm	1010/370/620	1020/440/730	1020/440/880	1000/440/1395	780/880/1160
Unit Dimensions(L/W/H)		inches	39.8"/14.6"/24.4"	40.2"/17.3"/28.7"	40.2"/17.3"/34.6"	39.4"/17.3"/54.9"	30.7"/34.6"/45.7"
Certification No. and Standards				UL 60335-1:2016 UL60335-2-40:2022 CAN/CSA-C22.2 NO. 60335-1:16 CSA C22.2 No. 60335-2-40:22

WARRANTY:

1 year warranty on all parts and a 2 year warranty on the compressor. With this warranty you will get NO hassle next business day replacement (if shipping service and inventory permits). As a valued customer you will get technical support through the lifetime ownership of your product. Our Heat Pump warranty cover failures that occur during normal operational conditions or manufactures defects. It does not cover failure due to inappropriate operation such as incorrect installation or physical damage.